CPP SP - 303
Co-Extruded Cast Polypropylene Film
Phoenix "CPP SP - 303" is a three layered cast polyproplene film with treatment on one side. It is an A/B/A coextruded film consisting of PP Copolymer/LLDPE/PP Copolymer. This three layer PP film is intended for bag making, printing and adhesive or extrusion laminations. It has the following features:
- High gloss and low haze
- Higher impact strength than monolayer CPP
- Easy printing with gravure or flexo inks
- High slip for good machinability
- Excellent roll confirmation
Typical Properties
| Properties | Unit | Test Method | Typical Values |
| Gauge | 50 2.00 |
||
| Haze | 1.4 |
||
| Yield | |||
Young's Modulus |
37 |
||
| Breaking Strength (Initial) | |||
| Breaking Strength (Ultimate) | |||
| Elongation | |||
| Impact Strength | |||
| Heat Seal Temp | |||
| Coefficient of friction | |||
| Treatment Level | |||
| Water Vapor Transmission Rate | |||
| Oxygen Transmission Rate |
The information above is believed to be reliable and accurate but is presented withouy guarantee on our part. Nothing herein is intended as a recommendation for use of our product in infringement of any patent.
DSCPP193sp303
Phoenix
Films, Inc.
P.O. Box 3816
Clearwater, FL 33767
727-446-0300
sales@phoenixfilms.com